Quick Reference Guide

286 | IGMP Snooping Commands
www.dell.com | support.dell.com
Example
Figure 17-106. Output of the show mac-address-table igmpsnooping Command
Report Fields Mac Address—A multicast MAC address for which the switch has forwarding and or filtering information.
The format is two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB. In a system the MAC address will be displayed as a MAC address and VLAN ID
combination of 8 bytes.
In an SVL system, the MAC address will be displayed as 6 bytes.
Type—This displays the type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description—The text description of this multicast table entry.
Interfaces—The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Force10#show mac-address-table igmpsnooping
<cr> Press Enter to execute the command.
(LVL7 FASTPATH Routing) #show mac-address-table igmpsnooping
Type Description Interfaces
----------------------- --------------------------------
00:01:01:00:5E:00:01:16 DynamicNetwork AssistFwd: 1/0/47
00:01:01:00:5E:00:01:18 DynamicNetwork AssistFwd: 1/0/47
00:01:01:00:5E:37:96:D0 DynamicNetwork AssistFwd: 1/0/47
00:01:01:00:5E:7F:FF:FA DynamicNetwork AssistFwd: 1/0/47
Related
Commands
show mac-address-table Depending on selected display parameters, displays various Multicast
Forwarding Database (MFDB) information.
show mac-addr-table Displays forwarding database entries