Quick Reference Guide

IGMP Snooping Commands | 285
show igmpsnooping fast-leave
Command
History
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Syntax
show igmpsnooping mrouter interface {unit/slot/port | vlan 1-3965}
Mode
Privileged Exec
Example
Figure 17-105. Output of the show igmpsnooping Command
Report Fields Slot/Port—The port on which multicast router information is being displayed
Multicast Router Attached—Whether or not multicast router is statically enabled on the interface
VLAN ID—(only for the
vlan 1-3965 option) The list of VLANs in which the interface is a member
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the Multicast Forwarding Database (MFDB)
table.
Syntax
show mac-address-table igmpsnooping
Mode
Privileged Exec
Version 2.3 Deprecated: Use show igmpsnooping to display whether or not IGMP Snooping is enabled
on the designated interface.
Parameters
unit/slot/port
Display ports on which Multicast Routers are detected. Enter interface in
unit/slot/port format.
vlan 1-3965
Display VLANS for the specified interface on which Multicast Routers are
detected. Routing must be enabled on the VLAN in order for the VLAN to
be reported by this command.
Force10#show igmpsnooping mrouter interface 1/0/1
Slot/Port...................................... 1/0/1
Multicast Router Attached...................... Disable