Quick Reference Guide

264 | RMON Commands
www.dell.com | support.dell.com
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
Syntax
rmon collection statistics controlEntry 1-65535 [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon collection statistics
controlEntry
1-65535 command.
Defaults
No default behavior
Mode
Interface Config
Command
History
rmon event
Add an event in the RMON event table.
Syntax
rmon event 1-65535 [log] [trap SNMP_community] [description string] [ownername]
To remove an RMON event, use the no rmon event 1-65535 command.
Parameters
controlEntry 1-65535 Enter the keyword controlEntry to specify the RMON group of statistics
using a value. Then enter an integer value from 1 to 65535 that uniquely
identifies the entry in the RMON Statistics Table.
owner name
(OPTIONAL) Enter the keyword owner followed by the owner name to
record the owner of the RMON group of statistics.
Range: 1–127 alphanumeric characters
Version 2.5.1.0 Introduced
Related
Commands
show rmon statistics Display the contents of RMON Statistics table for a specific index entry.
show rmon statistics brief Display a summary of the contents of the RMON Ethernet Statistics log.
Parameters
1-65535
Assign an event number in integer format from 1 to 65535. The value must
be unique in the RMON Event Table.
log (OPTIONAL) Enter the keyword log to generate an RMON log entry. The
log entry is triggered and sets the eventType in the RMON MIB to log or
log-and-trap.
Default: No log
trap SNMP_community
(OPTIONAL) Enter the keyword trap followed by an SNMP community
string to configure the eventType setting in the RMON MIB. This sets either
snmp-trap or log-and-trap.
Default: public