Quick Reference Guide

RMON Commands | 263
Example
Figure 16-92. RMON configuration Example
rmon collection history
Enable the RMON MIB history group of statistics collection on an interface.
Syntax
rmon collection history controlEntry 1-65535 [buckets number] [interval 5-3600] [owner
name]
To remove a specified RMON history group of statistics collection, use the no rmon collection
history controlEntry 1-65535 command.
Defaults
As described above
Mode
Interface Config
Command
History
Force10# config
Force10 (config)#rmon event 10
Force10 (config)#rmon event 20
Force10 (config)#rmon alarm 50 1.3.6.1.4.1.6027.1.1.16.0.2 absolute
rising-threshold 200 10 falling-threshold 100 20
Related
Commands
show rmon alarms Display the contents of the RMON Alarm Table for a specific index number.
show rmon alarms brief Display a summary of the contents of the RMON Alarm Table.
Parameters
controlEntry 1-65535 Enter the keyword controlEntry to specify the RMON group of statistics
using a value. Then enter an integer value from 1 to 65535 to uniquely
identify, in the RMON History Table, the RMON group of statistics.
buckets number
(OPTIONAL) Enter the keyword buckets followed the number of buckets
for the RMON collection history group of statistics.
Bucket Range: 1 to 1000
Default: 50
interval 5-3600
(OPTIONAL) Enter the keyword interval followed the number of seconds
in each polling cycle.
Range: 5 to 3600 seconds
Default: 1800 seconds
owner name
(OPTIONAL) Enter the keyword owner followed by the owner name to
record the owner of the RMON group of statistics.
Range: 1–127 alphanumeric characters
Version 2.5.1.0 Introduced
Related
Commands
show rmon history Display the contents of the RMON Ethernet History table for a specific index
number.
show rmon history brief Display the contents of RMON Log table for a specific index entry.