Quick Reference Guide

258 | GARP Commands
www.dell.com | support.dell.com
gmrp interfacemode enable all
This command enables GARP Multicast Registration Protocol (GMRP) on all interfaces. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently
be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
Syntax
gmrp interfacemode enable all
Use no gmrp interfacemode enable all to disable GARP Multicast Registration Protocol on all
interfaces.
Default
disabled
Mode
Global Config
Command
History
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a selected interface. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG),
GARP functionality will be disabled on that interface. GARP functionality will subsequently be
re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
Default
disabled
Syntax
set gmrp interfacemode
Use no set gmrp interfacemode to disable GARP Multicast Registration Protocol on a selected
interface.
Mode
Interface Config
Command
History
Version 2.5.2 Unsupported: not tested in v.2.5.2
Version 2.5.1 Unsupported: not tested in v.2.5.1
Version 2.3
Changed from
set gmrp interfacemode all; revised syntax.
Related
Commands
show gmrp configuration Display GARP Multicast Registration Protocol information for one
or all interfaces.
gmrp interfacemode enable (LAG) Enable GMRP on the selected LAG.
Version 2.5.2 Unsupported: not tested in v.2.5.2
Version 2.5.1 Unsupported: not tested in v.2.5.1
Related
Commands
show gmrp configuration Display GARP Multicast Registration Protocol information for one or all
interfaces.