Quick Reference Guide

GARP Commands | 257
GARP Multicast Registration Protocol (GMRP) Commands
This chapter provides a detailed explanation of the GMRP commands. The commands are divided into
two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every configuration
command, there is a show command that displays the configuration setting.
The commands in this sections are:
• gmrp adminmode on page 257
• set gmrp adminmode on page 257
• gmrp interfacemode enable all on page 258
• set gmrp interfacemode all on page 259
• show gmrp configuration on page 259
• show mac-address-table gmrp on page 260
gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default
value is disable.
Syntax
gmrp adminmode enable
Use no gmrp adminmode enable to disable GARP Multicast Registration Protocol (GMRP) on
the system.
Mode
Global Config
Command
History
set gmrp adminmode
Command
History
Version 2.5.2 Unsupported: not tested in v.2.5.2
Version 2.5.1 Unsupported: not tested in v.2.5.1
Version 2.3
Changed from
set gmrp adminmode. Modified syntax and moved to Global
Config mode from Privileged Exec mode
.
Version 2.3 Changed to gmrp adminmode.