Quick Reference Guide

254 | GARP Commands
www.dell.com | support.dell.com
GARP VLAN Registration Protocol (GVRP) Commands
This section provides a detailed explanation of the GVRP commands:
• gvrp adminmode enable on page 254
• gvrp interfacemode enable on page 254]
• gvrp interfacemode enable all on page 255
• set gvrp adminmode on page 255
• set gvrp interfacemode on page 255
• set gvrp interfacemode all on page 255
• show gvrp configuration on page 255
gvrp adminmode enable
This command enables GVRP globally.
Syntax
gvrp adminmode enable
Use no gvrp adminmode enable to disable GVRP.
Default
disabled
Mode
Global Config
Command
History
gvrp interfacemode enable
This command enables GVRP (GARP VLAN Registration Protocol) for a specific port.
Syntax
gvrp interfacemode enable
Use no gvrp interfacemode enable to disable GVRP (GARP VLAN Registration Protocol) for a
specific port. If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.
Default
disabled
Mode
Interface Config
Command
History
Version 2.5.2 Unsupported: not tested in v.2.5.2
Version 2.5.1 Unsupported: not tested in v.2.5.1
Version 2.3
Changed from
set gvrp interfacemode; revised syntax.
Version 2.5.2 Unsupported: not tested in v.2.5.2
Version 2.5.1 Unsupported: not tested in v.2.5.1
Version 2.3
Changed from
set gvrp interfacemode