Quick Reference Guide

246 | Time Commands
www.dell.com | support.dell.com
Usage
You can also set the poll interval for an SNTP client with the sntp client port command.
Default
6
Mode
Global Config
sntp unicast client poll-timeout
This command sets the number of seconds to wait for an SNTP response when the client is configured
in unicast mode.
Syntax
sntp unicast client poll-timeout poll-timeout
The poll-timeout range is 1 to 30 seconds.
Use the
no sntp unicast client poll-timeout command to reset the poll timeout for SNTP
unicast clients to its default value.
Default
5 seconds
Mode
Global Config
sntp unicast client poll-retry
This command sets the number of times to retry a request to an SNTP server after the first time-out before
attempting to use the next configured server when configured in unicast mode.
Syntax
sntp unicast client poll-retry poll-retry
The poll-retry for SNTP unicast clients is an integer from 0 to 10 retries.
Use the no sntp unicast client poll-retry version of this command to reset the poll retry for SNTP
unicast clients to its default value.
Default
1 retry
Mode
Global Config
sntp server
This command configures an SNTP server connection (with a maximum of three).
Syntax
sntp server ipaddress [priority [version [portid]]]