Quick Reference Guide

244 | Time Commands
www.dell.com | support.dell.com
Mode
Privileged Exec
Command
History
Example
Figure 14-85. Example of Output from show clock Command
SNTP Commands
This section provides a detailed explanation of the Simple Network Time Protocol (SNTP) commands.
The commands are comprised of two functional groups:
• Configuration Commands configure features and options of the switch.
• Show commands display settings, statistics, and other information. For every configuration
command there is a show command that displays the configuration setting.
This section describes the following commands:
• sntp broadcast client poll-interval
• sntp client mode
• sntp client port
• sntp unicast client poll-interval
• sntp unicast client poll-timeout
• sntp unicast client poll-retry
• sntp server
• show sntp
• show sntp client
• show sntp server
sntp broadcast client poll-interval
This command sets the poll interval for SNTP broadcast clients in seconds as a power of two where
poll-interval can be a value from 6 to 16.
Syntax
sntp broadcast client poll-interval poll-interval
Use the no sntp broadcast client poll-interval version of this command to reset the poll interval
for SNTP broadcast client back to its default value.
Default
6
Mode
Global Config
Version 2.5.1.0 Introduced
Force10# show clock
FRI MAR 02 08:57:47 2006