Quick Reference Guide

224 | Stacking Commands
www.dell.com | support.dell.com
Switch Model ID—This field displays the model identifier for the supported switch type.
Management Pref—This field indicates the administrative management preference value assigned to
the switch. This preference value indicates how likely the switch is to be chosen as the management
unit.
Code Type—This field displays the code load target identifier of the switch type.
Example 2
Figure 12-81. Sample Output from the show supported switchtype Command
Report Fields
When the switchindex variable is entered, the report fields are as follows:
Switch Type—This field displays the 32-bit numeric switch type for the supported switch.
Model Identifier—This field displays the model identifier for the supported switch type.
Switch Description—This field displays the description for the supported switch type.
Management Preference—Priority of the switch in management sequence
Expected Code Type—This field indicates the expected code type
Supported Cards—Slot, Card Index (CID), Model Identifier
Related
Commands
stack
This command enables the user to enter Stacking Config mode—”(config-stack)#”.
Syntax
stack
Mode
Global Config
Related
Commands
Force10-S50 #show supported switchtype 1
Switch Type....................... 0x56950201
Model Identifier.................. SA-01-GE-48T
Switch Description................ Force10 48 port Gigabit S50
Management Preference............. 1
Expected Code Type................ 0x100b000
Supported Cards:
Slot........................... 0
Card Index (CID)............... 2
Model Identifier............... SA-01-10GE-2P
show supported cardtype
Displays information about all card types (expansion modules)
supported in the system
copy Download files to the switch, upload files from the switch, or copy SFTOS images from
the management unit to other members of its stack.
member
Configure a switch as a member of the stack.
movemanagement Moves the management unit functionality from one switch to another