Quick Reference Guide

22 | Quick Start
www.dell.com | support.dell.com
Resetting to Factory Defaults
To help configure factory defaults, use one of the following commands:
Command Syntax Command Mode Purpose
clear config
Privileged Exec
Enter
yes when the prompt pops up to clear all the configurations
made to the switch. This option replaces the current running-config
with the most recent startup configuration file. However, if the
startup configuration file has been modified from the factory
default settings, this command does not restore the system to
factory defaults.
reload (or cold boot of the switch)
Privileged Exec
Enter yes when the prompt pops up that asks if you want to reset
the system.
Choose to reset the switch or cold boot the switch—both work
effectively. See reload on page 111, and see the Getting Started
chapter of the SFTOS Configuration Guide.