Quick Reference Guide

Security Commands | 213
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.
ip http javamode enable
Enable Java mode for the Web User interface (Web UI) to SFTOS.
Syntax
ip http javamode enable
Use no ip http javamode enable to disable Java mode.
Default
disabled
Mode
Global Config
Command
History
ip http secure-port
This command is used to set the SSLT port.
Syntax
ip http secure-port portid
The no ip http secure-port command resets the SSLT port to the default value.
The portid value can be from 1 to 65535.
Default
443
Mode
Global Config
Command
History
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or
to both TLS1 and SSL3.
Syntax
ip http secure-protocol [SSL3] [TLS1]
Default
SSL3 and TLS1
Version 2.5.1
Unsupported: The
SFTOS Web UI is not supported in v. 2.5.1 or 2.5.2.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Version 2.5.1
Unsupported: The
SFTOS Web UI is not supported in v. 2.5.1 or 2.5.2.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.