Quick Reference Guide

Security Commands | 209
Example
Figure 11-74. Example of show tacacs Command Output
Command
History
timeout
Specify the timeout value for a particular TACACS host.
Syntax
timeout timeout
Default
If no timeout value is specified, the global value is used.
Command Mode
TACACS Configuration
Secure Shell (SSH) Commands
The commands in this section are:
• ip ssh maxsessions on page 210
• ip ssh protocol on page 210
• ip ssh server enable on page 211
• ip ssh timeout on page 211
• show ip ssh on page 212
• sshcon maxsessions on page 212
• sshcon timeout on page 212
Force10 #show tacacs
Global Timeout: 5
IP address Port Timeout Priority
--------------- ----- ------- --------
10.10.10.226 49 Global 0
10.16.1.58 49 Global 0
Force10#
Version 2.5.1 Modified: Removed fields from report output — Status, Single, Connection
Related
Commands
tacacs-server host Identify a TACACS server.
Parameters
timeout
Range: 1 to 30 seconds
Related
Commands
tacacs-server host Identify a TACACS server.
tacacs-server timeout Specify the authentication and encryption key for all communications between
the client and the particular TACACS server.
show tacacs Display TACACS+ settings.