Quick Reference Guide

202 | Security Commands
www.dell.com | support.dell.com
Default
10
Mode
Global Config
radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to the
RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.
Syntax
radius server timeout seconds
The no radius server timeout command sets the timeout value to the default value, after which a
request must be retransmitted to the RADIUS server if no response is received.
Default
6 seconds
Mode
Global Config
show radius
This command is used to display the various RADIUS configuration items for the switch, as well as the
configured RADIUS servers.
Syntax
show radius [servers]
Mode
Privileged Exec
Report Fields
If the optional keyword servers is not included, the following RADIUS configuration items will be
displayed:
Primary Server IP Address—Indicates the configured server currently in use for authentication
Number of configured servers—The configured IP address of the authentication server
Max number of retransmits—The configured value of the maximum number of times a request packet is
retransmitted
Timeout Duration—The configured timeout value, in seconds, for request re-transmissions
Accounting Mode—Yes or No
If the optional keyword servers is included, the following information regarding configured RADIUS
servers is displayed.
IP Address—IP Address of the configured RADIUS server
Port—The port in use by this server
Type—Primary or secondary
Secret Configured—Yes / No