Quick Reference Guide

Security Commands | 189
Mode
Global Config
clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Syntax
clear dot1x statistics {unit/slot/port | all}
Mode
Privileged Exec
clear radius statistics
This command is used to clear all RADIUS statistics.
Syntax
clear radius statistics
Mode
Privileged Exec
dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the user
is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Syntax
dot1x defaultlogin listname
Mode
Global Config
dot1x initialize
This command begins the initialization sequence on the specified port. This command is only valid if
the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
Syntax
dot1x initialize unit/slot/port
Mode
Global Config
Command
History
Related
Commands
radius server host Configure the RADIUS authentication and accounting server.
tacacs-server host Specify a TACACS+ server host.
users defaultlogin Assign the authentication login list to use for non-configured users when
attempting to log in to the system.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.