Quick Reference Guide

Security Commands | 187
show port-security dynamic
This command displays the dynamically locked MAC addresses for the designated port.
Syntax
show port-security dynamic unit/slot/port
Mode
Privileged Exec
Report Field MAC Address — MAC address of the dynamically locked MAC
show port-security static
This command displays the statically locked MAC addresses for the designated port.
Syntax
show port-security static unit/slot/port
Mode
Privileged Exec
Report Field MAC Address—MAC Address of statically locked MAC
show port-security violation
This command displays the source MAC address of the last packet that was discarded on a locked port.
Syntax
show port-security violation unit/slot/port
Mode
Privileged Exec
Report Field MAC Address—MAC Address of discarded packet on locked port
Port-Based Network Access (IEEE 802.1X) Commands
This section contains the following commands:
• authentication login on page 188
• clear dot1x statistics on page 189
• clear radius statistics on page 189
• dot1x defaultlogin on page 189
• dot1x initialize on page 189
• dot1x login on page 190
• dot1x max-req on page 190
• dot1x port-control on page 190
• dot1x port-control all on page 191
• dot1x re-authenticate on page 191
• dot1x re-authentication on page 191
• dot1x system-auth-control on page 192