Quick Reference Guide

176 | System Logs
www.dell.com | support.dell.com
show logging history
Show the messages stored in the buffered log — last logged, first displayed.
Syntax
show logging history size
Defaults
1 message
Mode
EXEC Privilege
Command
History
Usage
Information
The output of this command is a copy of the buffered log saved locally, depending on the settings made
by using the logging host and logging facility commands. Also, when the number of messages
reaches the limit you set with the logging history size command, older messages are deleted from
the buffered log as newer ones are added to it.
Example
Figure 9-63. Sample Output from the show logging history Command
Related
Commands
logging buffered Enables logging of the system log to RAM and any other enabled destination,
including the console and any enabled syslog server.
logging cli-command Displays CLI activity in the log.
logging facility Configure the Syslog facility, used for error messages sent to Syslog servers.
Parameters
size
Indicate the number of messages to be displayed.
Range: 0 to 500
Default: 1 message
Version 2.5.1 Introduced
Force10 #show logging history 3
Syslog History Table: 500 maximum table entries
SNMP notifications : Enabled
<45> DEC 10 15:54:23 10.16.128.16-1 TRAPMGR[192696176]: traputil.c(661) 30 %%
Failed User Login: Unit: 1 User ID: 123user
<46> DEC 10 15:54:23 10.16.128.16-1 UNKN[192696176]: user_mgr.c(1368) 29 %% User
Login Failed for 123user
<45> DEC 10 15:54:13 10.16.128.16-1 TRAPMGR[192696176]: traputil.c(661) 28 %%
Failed User Login: Unit: 1 User ID: user123
<46> DEC 10 15:54:13 10.16.128.16-1 UNKN[192696176]: user_mgr.c(1368) 27 %% User
Login Failed for user123
<46> DEC 10 15:53:49 10.16.128.16-1 UNITMGR[192696176]: unitmgr.c(3544) 26 %%
Configuration propagation successful
Related
Commands
logging facility
Configure the facility type sent to Syslog servers
logging host
Configure the mirroring of system log messages to a syslog server.
logging history
Set the amount of information to be logged to the syslog.