Quick Reference Guide

System Logs | 173
Default
UDP Port = 514; severity level = critical
Mode
Global Config
logging persistent
Command
History
logging port
Command
History
logging syslog
This command enables logging to any configured syslog server.
Command
History
reconfigure
host-index
hostaddress
Revise the IP address of a configured syslog host. To learn the current association of
host-id with hostaddress, use the show logging hosts command. The value for
host-index is in the Index column of the output of that command.
remove
host-index
Remove the identified host, using host-index the described above.
Related
Commands
logging buffered Enables logging of the buffered log to RAM and any other enabled destination,
including the console and any enabled syslog server.
logging facility Configure the facility type sent to syslog servers.
logging history Specify which messages and how many are logged to the SFTOS logging
history table and through SNMP.
show logging history Show the messages stored in the buffered log.
show logging hosts Learn the association of the host ID with the host address.
Version 2.3 Deprecated (The event log, also called the persistent log, is always enabled. See show
logging eventlog on page 175.)
Version 2.3 Deprecated
Version 2.5.1
Deprecated. Use
logging host.
Related
Commands
logging host Configure the mirroring of system log messages to a syslog server.