Quick Reference Guide

170 | System Logs
www.dell.com | support.dell.com
logging buffered wrap
This command enables wrapping of in-memory logging when full capacity is reached. Otherwise when
full capacity is reached, logging stops.
Syntax
logging buffered wrap
Use no logging buffered wrap to disable wrapping of in-memory logging and to configure logging
to stop when full capacity is reached.
Default
wrap
Mode
Privileged Exec
logging cli-command
This command enables logging to the System Log of all Command Line Interface (CLI) commands
issued on the system.
Syntax
[no] logging cli-command
Default
enabled
Mode
Privileged Exec
logging console
This command enables logging of System log messages to the console.
Syntax
logging console [severitylevel]
The severitylevel value is specified through one of the following keywords or the keyword’s
representative integer, as shown here: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7). Note that the severity level set here does not change the
severity level set for the System log messages saved in RAM.
Related
Commands
logging buffered wrap Enables wrapping of in-memory logging when full capacity is
reached.
logging cli-command Enables logging to the System Log of all Command Line
Interface (CLI) commands issued on the system.
logging console Enables logging of System log messages to the console.
logging host Configures mirroring of System log messages to a syslog
server.
logging history Specify which messages and how many are logged to the
SFTOS logging history table and through SNMP.
show logging Displays buffered logging (the System log).