Quick Reference Guide

168 | Link Layer Discovery Protocol (LLDP) Commands

www.dell.com | support.dell.com

Example

Figure 8-60. Example Output from show lldp interface Commands

Force10 #show lldp interface 1/0/1

LLDP Interface Configuration

Interface Link Transmit Receive Notify TLVs Mgmt

--------- ------ -------- -------- -------- ------- ----

1/0/1 Down Disabled Disabled Disabled N

TLV Codes: 0- Port Description, 1- System Name

2- System Description, 3- System Capabilities

Force10 #show lldp interface all

LLDP Interface Configuration

Interface Link Transmit Receive Notify TLVs Mgmt

--------- ------ -------- -------- -------- ------- ----

1/0/1 Down Disabled Disabled Disabled N

1/0/2 Down Disabled Disabled Disabled N

1/0/3 Down Disabled Disabled Disabled N

1/0/4 Down Disabled Disabled Disabled N

1/0/5 Down Disabled Disabled Disabled N

----------!output truncated!-----------------------

Commands

lldp mode (global) Enable/disable LLDP globally.

lldp mode (interface) Enable/disable LLDP on a selected interface.

clear lldp neighbors Clear LLDP neighbor information.