Quick Reference Guide

Link Layer Discovery Protocol (LLDP) Commands | 163
lldp timers-reinit
Configure LLDP global timer for delay before re-initialization.
Syntax
lldp timers-reinit reinit-seconds
The reinit-seconds parameter is the delay before re-initialization of tasks and data structure.
Default
2
Mode
Global Config
Command
History
lldp transmit-mgmt
Include/Exclude LLDP management address TLV.
Syntax
lldp transmit-mgmt
Mode
Interface Config
Command
History
lldp transmit-tlv
Specify which optional type length values (TLVs) in the 802.1AB basic management set are transmitted
in the LLDPDUs.
Syntax
[no] lldp transmit-tlv [port-desc | sys-cap | sys-desc | sys-name]
Related
Commands
lldp hello The interval in seconds to transmit local LLDP data
lldp multiplier The interval multiplier to set local LLDP data TTL
lldp timers-reinit Configure LLDP global timer for delay before re-initialization.
lldp notification Display LLDP neighbor information.
Version 2.5.1 Introduced
Related
Commands
lldp hello The interval in seconds to transmit local LLDP data
lldp multiplier The interval multiplier to set local LLDP data TTL
lldp notification Minimum interval to send remote data change notifications
Version 2.5.1 Introduced
Related
Commands
lldp hello The interval in seconds to transmit local LLDP data
lldp multiplier The interval multiplier to set local LLDP data TTL
lldp notification Minimum interval to send remote data change notifications