Quick Reference Guide

156 | VLAN Commands
www.dell.com | support.dell.com
Command
History
Example
Figure 7-53. Example of Use of show dvlan-tunnel l2pdu-forwarding Command
Related
Commands
Version 2.5.2 Unsupported: This command was not tested in SFTOS 2.5.2, so is not supported
Version 2.5.1 Unsupported: This command was not tested in SFTOS 2.5.1, so is not supported
Version 2.3.1.9 Introduced
Force10 S50 #show dvlan-tunnel l2pdu-forwarding
L2Pdu-Forwarding Mode: enabled.
L2Pdu-Forwarding Mac: 01:01:E8:00:00:00
dvlan-tunnel l2pdu-forwarding enable Enable/disable the l2pdu-forwarding mode.
dvlan-tunnel l2pdu-forwarding
mac-address
Set/clear the l2pdu-forwarding MAC address.
mode dvlan-tunnel Enable Double VLAN Tunneling on the specified interface.