Quick Reference Guide

146 | VLAN Commands
www.dell.com | support.dell.com
vlan protocol group add protocol
This command adds the named protocol to the protocol-based VLAN identified by groupid. A group
may have more than one protocol associated with it. Each interface and protocol combination can only
be associated with one group. If adding a protocol to a group causes any conflicts with interfaces
currently associated with the group, this command will fail and the protocol will not be added to the
group. The possible values for protocol are ip, arp, and ipx.
The no version of this command removes the protocol from this protocol-based VLAN group that is
identified by this groupid. The possible values for protocol are ip, arp, and ipx.
Syntax
[no] vlan protocol group add protocol groupid protocol
Default
None
Mode
Global Config
Command
History
Related
Commands
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by the groupid.
Syntax
vlan protocol group remove groupid
Mode
Global Config
Command
History
Related
Commands
vlan pvid
This command changes the VLAN ID per interface.
The no version of this command sets the VLAN ID per interface to 1.
Version 2.5.2 Unsupported: not tested in 2.5.2
Version 2.5.1 Unsupported: not tested in 2.5.1
vlan protocol group Adds a protocol-based VLAN group to the system.
vlan protocol group
remove
Remove the protocol-based VLAN group that is identified by the
groupid.
protocol group Attach a group ID to the selected VLAN.
Version 2.5.2 Unsupported: not tested in 2.5.2
Version 2.5.1 Unsupported: not tested in 2.5.1
vlan protocol group Adds a protocol-based VLAN group to the system.
vlan protocol group
add protocol
Add the named protocol to the protocol-based VLAN identified by
groupid.
protocol group Attach a group ID to the selected VLAN.