Quick Reference Guide

VLAN Commands | 135
Example
Figure 7-42. Output of the show vlan Command
Report Fields Description of the fields in the show vlan report:
Vlan Id: List of configured VLAN IDs
Status: Active or Inactive. A VLAN is active only if the VLAN contains interfaces and those
interfaces are operationally up.
Q: “T” indicates that the port is tagged; “U” indicates untagged.
Ports:”E” for Ethernet, followed by the port numbers (unit/slot/port) in the VLAN”E ^”, followed by
the port numbers in the native VLAN.
The output of the show vlan brief command is shown in the following example:
Example
Figure 7-43. Output of the show vlan brief Command
Fields in the show vlan brief report:
VLAN: VLAN ID
Name: Assigned VLAN name
MAC Aging: Displayed in seconds
IP Address: IP Address assigned to the VLAN
Force10#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, E - Ethernet interface, ^ - Native VLAN
VlanId Status Q Ports
------ --------- - --------
* 1 Active U E ^1/0/1 , 1/0/2 ,^1/0/3 ,^1/0/4 ,^1/0/6 ,^1/0/7
^1/0/8 ,^1/0/9 ,^1/0/10,^1/0/11,^1/0/12,^1/0/13
^1/0/14,^1/0/15,^1/0/16,^1/0/17,^1/0/18,^1/0/19
^1/0/23,^1/0/25,^1/0/26,^1/0/27,^1/0/28,^1/0/29
^1/0/30,^1/0/31,^1/0/32,^1/0/33,^1/0/34,^1/0/35
^1/0/36,^1/0/37,^1/0/38,^1/0/39,^1/0/40,^1/0/41
^1/0/42,^1/0/43,^1/0/44,^1/0/45,^1/0/46,^1/0/47
^1/0/48
2 Active U E ^1/0/20,^1/0/21,^1/0/22,^1/0/24
T E 1/0/40, 1/0/42, 1/0/43, 1/0/44
U ^Po1 ( 1/0/35, 1/0/36, 1/0/37)
U ^Po2 ( 1/0/10)
U ^Po3 ( 1/0/15)
4 Inactive T E 1/0/3 , 1/0/44
5 Active U E ^1/0/5
T E ^1/0/2 , 1/0/44
300 Inactive
Note: Note, in Figure 7-42, that ports added to VLANs as tagged are also still listed in the
default VLAN 1. If they had been added as untagged, they would be removed from VLAN 1.
Force10#show vlan brief
VLAN Name MAC Aging IP Address
--------- ---------- -------- ----------------
1 abc 1800 unassigned
2 egf 1800 unassigned
3 sss 1800 unassigned
5 1800 unassigned
12 1800 unassigned
13 1800 unassigned