Quick Reference Guide

134 | VLAN Commands
www.dell.com | support.dell.com
Related
Commands
show vlan
This command displays information about VLANs, either detailed information for a specific VLAN or
summary information for all configured VLANs. The ID is a valid VLAN identification number.
Syntax
show vlan [association | brief | id vlanid | name | port]
Parameters
Mode
Privileged Exec and User Exec
Command
History
Usage
Information
The show vlan association command is not available for the S50. See show vlan association mac
on page 136 and show vlan association subnet on page 137.
For the show vlan command, without parameters, the output is shown in Figure 7-42.
For the show vlan brief command, the output is shown in Figure 7-43.
For the show vlan id command, the output is shown in Figure 7-44.
untagged Sets tagging to disabled for a specific port (or range of ports) in the selected VLAN.
association
(OPTIONAL) See show vlan association mac on page 136 and show vlan
association subnet on page 137.
brief (OPTIONAL) Enter the keyword brief to display summary information for
all configured VLANs.
id vlanid (OPTIONAL) Enter the keyword id followed, in place of vlanid, by the
desired VLAN number to display detailed information for the selected
VLAN.
Range: 1 to 3965
name (OPTIONAL) Enter the keyword name to display the names of configured
VLANs.
port (OPTIONAL) Enter the keyword port to display 802.1Q port parameters.
Version 2.5.1 Modified: Added “Native VLAN” information to output and revised the presentation of LAG
(port channel) in the
Version 2.3
Modified: Changed parameters to include
show vlan brief.