Quick Reference Guide

VLAN Commands | 131
name (VLAN)
This command changes the name of a VLAN.
Syntax
[no] name newname
The newname is an alphanumeric string of up to 32 characters.
The no version of this command sets the name of a VLAN to a blank string.
Default
The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a blank string.
Mode
Interface VLAN
Command
History
Related
Commands
network mgmt_vlan
Command
History
Related
Commands
participation (VLAN)
Configure how ports participate in a specific VLAN.
Mode
Interface VLAN
Command
History
Related
Commands
Version 2.3
Modified: Changed from
vlan name to name and mode changed from VLAN database to
Interface VLAN. Removed ID range variable.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
ip address (VLAN) Create VLAN and enter Interface VLAN mode.
Version 2.5.1 Removed from CLI
Version 2.3
Deprecated: The functionality is available in the
vlan participation command within
the Interface ManagementEthernet mode.
interface managementethernet Invokes ManagementEthernet mode (the (Config-if-ma)# prompt), in
which the user can set the network parameters of the switch, including
using the
vlan participation command.
vlan participation (management
VLAN only)
Assigns the management VLAN.
Version 2.5.1 Removed from CLI
Version 2.3 Deprecated
tagged Sets tagging to enabled for a specific port (or range of ports) in the selected VLAN.