Quick Reference Guide

130 | VLAN Commands
www.dell.com | support.dell.com
makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to a
static VLAN (one that is permanently configured and defined).
Syntax
makestatic
Mode
Interface VLAN
Command
History
Related
Commands
mtu (VLAN)
This command sets the MTU (Maximum Transmission Unit) of the selected VLAN.
Syntax
[no] mtu 576-1500
Default
1500
Mode
Interface VLAN
Command
History
Related
Commands
interface vlan Groups a set of individual interfaces, a range of interfaces, or more than one range of
interfaces, to which subsequent configuration commands can be applied (bulk
configuration)
ip address (VLAN) Assigns an IP address and subnet mask to the selected VLAN to support Layer 3
routing.
protocol group Attach a group ID to the selected VLAN.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
Version 2.3
Changed from
vlan makestatic vlan-id to makestatic and moved to Interface VLAN
mode.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
Version 2.3 Introduced
mtu (port) Sets the MTU for a selected port (Interface Config mode)
mtu (LAG) Sets the MTU for a selected port channel
ip mtu Sets the MTU on a routing interface (Interface Config or VLAN mode)
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports