Quick Reference Guide

126 | VLAN Commands
www.dell.com | support.dell.com
Virtual LAN (VLAN) commands in this section are:
• clear vlan on page 127
• description on page 127
• encapsulation (VLAN) on page 128
• interface vlan on page 129
• makestatic on page 130
• mtu (VLAN) on page 130
• name (VLAN) on page 131
• network mgmt_vlan on page 131
• participation (VLAN) on page 131
• priority (VLAN) on page 132
• protocol group on page 132
• protocol vlan group on page 132
• protocol vlan group all on page 133
• pvid (VLAN) on page 133
• show vlan on page 134
• show vlan association mac on page 136
• show vlan association subnet on page 137
• show vlan port on page 138
• tagged on page 139
• untagged on page 140
• vlan on page 141
• vlan acceptframe on page 141
• vlan association mac on page 141
• vlan association subnet on page 142
• vlan database on page 143
• vlan ingressfilter on page 143
• vlan participation (interface) on page 143
• vlan participation all on page 144
• vlan port acceptframe on page 144
makestatic
Change the VLAN type from Dynamic to
Static.
This chapter
mtu (VLAN)
Set the default MTU size. This chapter
name (VLAN)
Configure an optional VLAN name. This chapter
protocol
Configure the protocols associated with
particular group IDs.
This chapter
tagged/untagged
Configure tagging for an interface. This chapter
Table 7-19. Commands in the Interface VLAN Mode (continued)
Commands
Command/Command Family
Description
Location of
Command Syntax Description