Quick Reference Guide

122 | System Configuration Commands
www.dell.com | support.dell.com
update bootcode
This command updates the bootcode (boot loader) on the switch. The bootcode is read from the active
image for subsequent reboots.
Syntax
update bootcode [unit]
Parameters
Default
all units in the stack
Mode
Privileged Exec
Command
History
Related
Commands
Configuration Scripting
Configuration scripting enables you to generate text-formatted script files representing the current
configuration. These configuration script files can be uploaded to a PC and edited, downloaded to the
system and applied to the system. Configuration scripts can be applied to one or more switches with
no/minor modifications.
The commands in this section are:
• script apply on page 123
• script delete on page 123
• script list on page 123
• script show on page 124
• script validate on page 124
unit
(OPTIONAL) This parameter is valid only on stacks. An error is returned if a number is entered on a
standalone system. In a stack, the parameter identifies the stack member on which this command
must be executed. Default: all units in the stack
Version 2.5.1 Introduced
boot system Activate the specified software image for subsequent reboots.
delete (software image) Delete the designated image file from permanent storage on the switch.
show bootvar Display version information and activation status for the current active and
backup images.
Note: The file extension must be “.scr”.
A maximum of ten scripts are allowed on the switch.
The combined size of all script files on the switch cannot exceed 500 KB.
Configuration script files are not distributed across the stack, and only live in the unit that is
the master unit at the time of the file download.