Quick Reference Guide

120 | System Configuration Commands
www.dell.com | support.dell.com
Related
Commands
delete (software image)
This command deletes the designated image file from permanent storage on the switch.
Syntax
delete [unit] {image1 | image2}
Parameters
Default
all units in the stack
Mode
Privileged Exec
Command
History
Related
Commands
filedescr (software image)
This command associates a given text description with an image. Any existing description is replaced.
Syntax
filedescr [unit] {image1 | image2} text-description
Parameters
Default
all units in the stack
Mode
Privileged Exec
copy Download files to the switch, or upload files from the switch.
update bootcode Activate the specified software image for subsequent reboots.
show bootvar Display version information and activation status for the current active and backup
images.
unit
(OPTIONAL) This parameter is valid only on stacks. An error is returned if a
number is entered on a standalone system. In a stack, the parameter identifies the
stack member on which this command must be executed. Default: all units in the
stack
image1 | image2
Identify the software image to delete. The image to be deleted must be a backup
image. If this image is the active image, or if this image is activated, the CLI
displays an error.
Version 2.5.1 Introduced
update bootcode Activate the specified software image for subsequent reboots.
show bootvar Display version information and activation status for the current active and backup
images.
unit
(OPTIONAL) For stacking, this parameter identifies the node on which this
command must be executed. When this parameter is not supplied, the command is
executed on all nodes in the stack.
Default: all units in the stack
image1 | image2
Identify the software image to associate with the given text description.
text-description
Enter a text description for the selected software image.