Quick Reference Guide

110 | System Configuration Commands
www.dell.com | support.dell.com
Example
Figure 6-36. Using the copy command to Download the CLI Banner
enable passwd
This command changes the Privileged Exec password (commonly called the “enable” password),
which is not set when SFTOS boots for the first time. First type the command, then press Enter.
Syntax
enable passwd password
Mode
Global Config
Command
History
logout
Close the current Telnet connection or reset the current serial connection.
Syntax
logout
Mode
Privileged Exec
copy tftp://192.168.77.52/banner.txt nvram:clibanner
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.77.52
TFTP Path...................................... ./
TFTP Filename.................................. banner.txt
Data Type...................................... Cli Banner
Are you sure you want to start? (y/n) y
CLI Banner file transfer operation completed successfully!
(Force10 S50) #exit
Force10 S50) >logout
FORCE10's Login Banner - Unauthorized access is punishable by law.
User:
Related
Commands
copy (clibanner) Downloads the CLI banner text file to the switch.
write
Saves the running configuration to NVRAM, duplicating the
functionality of
copy system:running-config nvram:startup-config
Parameters
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Note: Save configuration changes before logging out.
Related
Commands
quit
C
lose the current Telnet connection, or reset the current serial connection.