Quick Reference Guide

Management | 67
4
Management
This chapter covers the following management tasks:
• Creating the Management IP Address
• Changing the Management VLAN from the Default on page 68
• Verifying Access to a Management Port on page 69
• Verifying Management Port Connectivity on page 69
• Setting Stack Management Preferences on page 69
• Setting the Host Name Prompt on page 70
• Restoring the Configuration to Factory Defaults on page 70
• Setting up SNMP Management on page 71
• Link Layer Discovery Protocol (LLDP) on page 75
• Setting up Remote Network Monitoring (RMON) on page 75
• Setting the System Date and Time on page 78
• Gathering Details about the Switch on page 81
Creating the Management IP Address
The procedure for creating the management IP address is introduced in Setting the Management IP
Address on page 39 in the Getting Started chapter. Figure 4-39 shows the use of that procedure:
Figure 4-39. Creating the Management Port IP Address
Force10 (Config)#management route default 10.10.1.254
Force10 (Config)#interface managementethernet
Force10 (Config-if-ma)#ip address 10.10.1.251 255.255.255.0
Force10 (Config-if-ma)#exit
Force10 (Config)#exit
Force10 #show interface managementethernet
IP Address..................................... 10.10.1.151
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 10.10.1.254
Burned In MAC Address.......................... 00:01:E8:D5:A0:39
Locally Administered MAC Address............... 00:00:00:00:00:00
MAC Address Type............................... Burned In
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1
Web Mode....................................... Disable
Java Mode...................................... Disable