Quick Reference Guide

RFCs, MIBs, and Traps | 293
SNMP Traps
SNMP traps are the messages that are sent to designated trap receivers; they also appear in the report
generated by the
show logging traplogs command, an abbreviated sample of which appears in
Figure A-269. A replication of the trap also appears in the System log, as described in Displaying the
SNMP Trap Log on page 106.
Figure A-269. Using the show logging traplogs Command
Note that the report states that the trap log capacity is 256 traps. So, if the capacity is reached, the log
wraps; in other words, newer traps replace the oldest ones.
For more on SNMP management, see the Setting up SNMP Management on page 71. For more on logging,
see the Syslog chapter, most specifically Displaying the SNMP Trap Log on page 106.
Force10 #show logging traplogs
Number of Traps Since Last Reset............... 60926
Trap Log Capacity.............................. 256
Number of Traps Since Log Last Viewed.......... 59852
Log System Up Time Trap
--- ------------------------ -------------------------------------------------
0 3 days 10:23:55 Last or default VLAN deleted: VLAN: 10
1 3 days 10:23:55 Last or default VLAN deleted: VLAN: 1
2 1 days 05:27:21 Link Up: Unit: 1 Slot: 0 Port: 48
3 1 days 05:18:11 Failed User Login: Unit: 1 User ID: ker.
4 1 days 05:18:11 Failed User Login: Unit: 1 User ID: ker.
5 1 days 05:18:10 Failed User Login: Unit: 1 User ID: th.
6 1 days 05:18:09 Failed User Login: Unit: 1 User ID: ker.
7 1 days 05:18:09 Failed User Login: Unit: 1 User ID: ngth.
8 1 days 05:18:07 Failed User Login: Unit: 1 User ID: % Inva
9 1 days 05:18:07 Failed User Login: Unit: 1 User ID: ngth.
10 1 days 05:18:05 Failed User Login: Unit: 1 User ID: ker.
11 1 days 05:18:04 Failed User Login: Unit: 1 User ID: ngth.
12 1 days 05:18:02 Failed User Login: Unit: 1 User ID: ker.