Quick Reference Guide

VLANs | 235
Figure 14-200. Example Output from show vlan id Command
Use the show vlan port command, with an interface or all parameter, to learn the association between
individual ports and VLANs:
Figure 14-201. Example Output from show vlan Command
Force10#show vlan id 1
Codes: * - Default VLAN, G - GVRP VLANs, E - Ethernet interface, ^ - Native VLAN
Vlan Id Status Q Ports
--------- ---------- - ------
2 Inactive T E ^1/0/3
R2 #show vlan id 300
Codes: * - Default VLAN, G - GVRP VLANs, E - Ethernet interface
Vlan Id Status Q Ports
------- --------- - --------
300 Active T Po1
Force10-S50 #show vlan port 1/0/1
Port Acceptable Ingress Default
Interface VLAN ID Frame Types Filtering GVRP Priority
--------- ------- ------------ ----------- ------- --------
1/0/1 1 Admit All Enable Disable 0
Protected Port .............................. False
Force10-S50 #show vlan port all
Port Acceptable Ingress Default
Interface VLAN ID Frame Types Filtering GVRP Priority
--------- ------- ------------ ----------- ------- --------
1/0/1 1 Admit All Enable Disable 0
1/0/2 1 Admit All Enable Disable 0
1/0/3 1 Admit All Enable Disable 0
1/0/4 1 Admit All Enable Disable 0
1/0/5 1 Admit All Enable Disable 0
1/0/6 1 Admit All Enable Disable 0
1/0/7 1 Admit All Enable Disable 0
1/0/8 1 Admit All Enable Disable 0
1/0/9 1 Admit All Enable Disable 0
1/0/10 1 Admit All Enable Disable 0
!----output truncated--------!