Quick Reference Guide

190 | Quality of Service
www.dell.com | support.dell.com
Figure 12-147. show policy-map Command Example
The following is sample output from show policy-map interface:
Figure 12-148. show policy-map interface interface Command Example
Using the show service-policy Command
show service-policy
Command Syntax Command Mode Usage
show service-policy in Privileged Exec This command displays a summary of policy-oriented statistics
information for all interfaces in the specified direction. The
direction parameter indicates the interface direction of interest.
This command enables or disables the route reflector client. A
route reflector client relies on a route reflector to re-advertise its
routes to the entire AS. The possible values for this field are
enable and disable.
Force10 #show policy-map pm-1
Policy Name.................................... pm-1
Policy Type.................................... In
Class Name..................................... cl-map-1
Assign Queue................................... 3
--More-- or (q)uit
Class Name..................................... cl-map-2
Mark IP Precedence............................. 1
Force10 #show policy-map interface 1/0/5 in
Interface...................................... 1/0/5
Direction...................................... In
Operational Status............................. Down
Policy Name.................................... pm-1
Interface Summary:
Class Name..................................... cl-map-1
In Discarded Packets........................... 0
Class Name..................................... cl-map-2
In Discarded Packets........................... 0
Force10 #