Quick Reference Guide
Quality of Service | 187
Policy Attribute Table Size—The current number of entries (rows) in the Policy Attribute Table.
Policy Attribute Table Max—The maximum allowed entries (rows) for the Policy Attribute Table.
Service Table Size—The current number of entries (rows) in the Service Table.
Service Table Max—The maximum allowed entries (rows) for the Service Table.
The following examples show sample output from the
show diffserv and show diffserv service brief
commands.
Figure 12-144. Using the show diffserv Command
Figure 12-145. Using the show diffserv service brief Command
Using the “show policy-map” Command
The command displays all configuration information for the specified policy.
The following values can be displayed:
Assign Queue—Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to the class.
Conform CoS—The action to be taken on conforming packets per the policing metrics.
Conform Secondary CoS—The action to be taken on packets conforming with the secondary class of service
value per the policing metrics.
Command Syntax Command Mode Usage
show policy-map [policyname |
interface]
Policy Class This command displays all configuration information for
the specified policy. The policyname is the name of an
existing DiffServ policy. The interface is an existing
interface.
Force10 #show diffserv
DiffServ Admin mode............................ Enable
Class Table Size Current/Max................... 3 / 25
Class Rule Table Size Current/Max.............. 4 / 150
Policy Table Size Current/Max.................. 1 / 64
Policy Instance Table Size Current/Max......... 2 / 576
Policy Attribute Table Size Current/Max........ 2 / 1728
Service Table Size Current/Max................. 48 / 400
Force10 #show diffserv service brief
DiffServ Admin mode............................ Enable
Interface Direction OperStatus Policy Name
----------- ----------- ---------- -------------------------------
1/0/1 In Up pm-1
1/0/2 In Down pm-1
1/0/3 In Down pm-1
!-------------output deleted---------!