Quick Reference Guide
114 | Configuring Interfaces
www.dell.com | support.dell.com
Port
Contrast the output in Figure 7-78, for the S50 model, to that of Figure 7-79, for the S50V
Figure 7-79. S50V Model: The show interface Command for Summary Packet Information for One
Port
Figure 7-80. The show interface ethernet switchport Command for Detailed Packet Data on the
Force10 #show interface 1/0/1
Ports 1 through 48
Packets Received Without Error................. 0
Packets Received With Error.................... 0
Broadcast Packets Received..................... 0
Packets Transmitted Without Errors............. 0
Transmit Packet Errors......................... 0
Collision Frames............................... 0
Time Since Counters Last Cleared............... 0 day 0 hr 25 min 38 sec
Force10 #
Force10-S50V#show interface 1/0/1
Packets Received Without Error................. 1555
Packets Received With Error.................... 0
Broadcast Packets Received..................... 642
Packets Transmitted Without Errors............. 0
Transmit Packet Errors......................... 0
Collision Frames............................... 0
Time Since Counters Last Cleared............... 3 day 20 hr 59 min 6 sec
Native Vlan.................................... 1
Rate Info (interval 300 seconds):
Packets Rx Rate Mbits/sec...................... 00.00
Packets Tx Rate Mbits/sec...................... 00.00
Packets Rx Rate packets/sec.................... 00.00
Packets Tx Rate packets/sec.................... 00.00
Packets Rx Line Rate........................... 0.00%
Packets Tx Line Rate........................... 0.00%
Force10-S50V#