Quick Reference Guide

106 | System Logs
www.dell.com | support.dell.com
Displaying the SNMP Trap Log
The show logging traplogs command displays a trap summary (number of traps since last reset and last
view), followed by trap details, as shown in Figure 6-73.
Figure 6-73. Using the show logging traplogs Command
Traps are also replicated in the System log. They are denoted by the “TRAPMGR” Component name and
the “traputil.c” file name. For example, when accessing an S-Series switch through Telnet, the switch
generates a multi-user trap, which appears in the
show logging traplogs command output in this form:
0 0 days 09:24:46 Multiple Users: Unit: 0 Slot: 3 Port: 1
For more on the System log output, see Displaying the System Log on page 103.
The
clear traplog command (Privileged Exec mode) empties the trap log.
For more on SNMP management, see Setting up SNMP Management on page 71.
Note: You can copy the trap log from the switch to a TFTP server. See Downloading and
Uploading Files on page 44 in the Getting Started chapter.
Force10 #show logging traplogs
Number of Traps Since Last Reset............6
Number of Traps Since Log Last Viewed.......6
Log System Up Time Trap
--- -------------- ----------------------------------------------
0 3 days 10:23:55 Last or default VLAN deleted: VLAN: 10
1 3 days 10:23:55 Last or default VLAN deleted: VLAN: 1
2 1 days 05:27:21 Link Up: Unit: 1 Slot: 0 Port: 48
3 0 days 00:00:46 Link Up: Unit: 3 Slot: 0 Port: 2
4 0 days 00:01:01 Cold Start: Unit: 0
5 0 days 00:21:33 Failed User Login: Unit: 1 User ID: admin
6 0 days 18:33:31 Failed User Login: Unit: 1 User ID: \
7 0 days 19:27:05 Multiple Users: Unit: 0 Slot: 3 Port: 1
8 0 days 19:29:57 Multiple Users: Unit: 0 Slot: 3 Port: 1