Reference Guide

Interfaces | 281
Related
Commands
show config
Display the current configuration of the selected LAG.
Syntax
show config
Command Modes
INTERFACE PORTCHANNEL
Example
Figure 14-41. show config Command Sample Output for a Selected LAG
Command
History
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
group Groups two LAGs in a supergroup (“fate-sharing group”).
show interfaces port-channel Displays information on configured Port Channel groups.
FTOS(conf-if-po-1)#show config
!
interface Port-channel 1
no ip address
shutdown
FTOS(conf-if-po-1)#
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
channel-number
For a Port Channel interface, enter the keyword port-channel followed by a
number:
Range: 1-128
brief (OPTIONAL) Enter the keyword brief to display only the port channel
number, the state of the port channel, and the number of interfaces in the port
channel.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module