Deployment Guide

Example
Dell#show lldp statistics
--------- LLDP GLOBAL STATISTICS ON CHASSIS ------------
Total number of neighbors: 2
Last table change time: 1w5d4h, In ticks: 52729764
Total number of Table Inserts: 56
Total number of Table Deletes: 54
Total number of Table Drops: 0
Total number of Table Age Outs: 12
Dell#
show running-cong lldp
Display the current global LLDP conguration.
Syntax
show running-config lldp
Defaults none
Command Modes EXEC Privilege
Command History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show running-config lldp
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 15
multiplier 3
no disable
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
The LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands.
As dened by ANSI/TIA-1057, LLDP-MED provides organizationally specic TLVs (Type Length Value), so that endpoint devices and
network connectivity devices can advertise their characteristics and conguration information. The Organizational Unique Identier (OUI)
for the Telecommunications Industry Association (TIA) is 00-12-BB.
• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate using IP, and uses the LLDP-
MED framework.
• LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an LLDP-MED endpoint device,
and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell Networking system is an LLDP-MED network connectivity
device.
Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability to:
• manage inventory
• manage Power over Ethernet (POE)
• identify physical location
802
Link Layer Discovery Protocol (LLDP)