Deployment Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To fully enable DNS, also specify one or more domain name servers with the ip name-server command.
The Dell Networking OS does not support sending DNS queries over a VLAN. DNS queries are sent out all other
interfaces, including the Management port.
To view current bindings, use the show hosts command.
Related Commands
ip name-server — species a DNS server.
show hosts — Views the current bindings.
ip domain-name
Congure one domain name for the switch.
Syntax
ip domain-name name
To remove the domain name, use the no ip domain-name command.
Parameters
name Enter one domain name to be used to complete unqualied names (that is, incomplete
domain names that cannot be resolved).
Defaults Not congured.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
You can only congure one domain name with the ip domain-name command. To congure more than one
domain name, congure the ip domain-list command up to six times.
To enable dynamic resolution of hosts, use the following steps:
• specify a domain name server with the ip name-server command
• enable DNS with the ip domain-lookup command
To view current bindings, use the show hosts command.
Related Commands
ip domain-list — congures additional names.
IPv4 Routing 577