Reference Guide

Access Control Lists (ACL) | 91

Access Control Lists (ACL)

Overview

The Dell Force10 operating software (FTOS) supports the following types of access control lists

(ACLs), IP prefix lists, and route maps:

• Commands Common to all ACL Types

• Common IP ACL Commands

• Standard IP ACL Commands

• Extended IP ACL Commands

• Common MAC Access List Commands

• Standard MAC ACL Commands

• Extended MAC ACL Commands

• IP Prefix List Commands

• Route Map Commands

Commands Common to all ACL Types

The following commands are available within each ACL mode and do not have mode-specific options.

Some commands may use similar names, but require different options to support the different ACL

types (for example, deny).

• description

• remark

• resequence access-list

• resequence prefix-list ipv4

• show config

description

Configure a short text string describing the ACL.

Syntax

description text

Parameters

Note: For ACL commands used in the Trace function, refer to the Secure DHCP Commands

section in the chapter Security.

text

Enter a text string up to 80 characters long.