Reference Guide

Stacking Commands | 611

Stacking Commands

Overview

For more information about using the MXL 10/40GbE Switch stacking feature, refer to the “Stacking

MXL 10/40GbE Switches” chapter in the FTOS Configuration Guide.

Commands

The commands described in this chapter are used for managing the stacking of MXL 10/40GbE switch

systems. The stacking commands are:

• redundancy disable-auto-reboot

• redundancy force-failover stack-unit

• reset stack-unit

• show redundancy

• show system stack-ports

• show system stack-unit stack-group

• stack-unit stack group

• stack-unit priority

• stack-unit provision

• stack-unit renumber

redundancy disable-auto-reboot

Prevent the MXL 10/40GbE switch stack unit from rebooting if they fail.

Syntax

redundancy disable-auto-reboot stack-unit [0-5 | members]

To return to the default, use the no redundancy disable-auto-reboot stack-unit [0-5 |

members]

command.

Defaults

Disabled (the failed switch is automatically rebooted).

Command Modes

CONFIGURATION

Command

History

Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module