Reference Guide

600 | Simple Network Management Protocol (SNMP) and Syslog
www.dell.com | support.dell.com
Usage
Information
When the number of messages reaches the limit you set with the logging history size command, older
messages are deleted as newer ones are added to the table.
Related
Commands
logging monitor
Specify which messages are logged to Telnet applications.
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
Defaults
7 or debugging
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as
logging buffer, Syslog server, or terminal lines.
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no logging on
command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you use the no logging on command, messages are logged only to the console.
Related
Commands
show logging history Displays information logged to the history buffer.
level
Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts,
critical, errors, warnings, notifications, informational, or debugging.
The default is 7 or debugging.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
default logging monitor Returns the logging monitor parameters to the default setting.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
logging Enables logging to Syslog server.
logging buffered Sets the logging buffered parameters.
logging console Sets the logging console parameters.
logging monitor Sets the logging parameters for the terminal connections.