Reference Guide

584 | Simple Network Management Protocol (SNMP) and Syslog
www.dell.com | support.dell.com
Related
Commands
snmp-server contact
Configure contact information for troubleshooting this SNMP node.
Syntax
snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server contact command.
Parameters
Defaults
none
Command Modes
CONFIGURATION
Command
History
snmp-server enable traps
Enable SNMP traps.
Syntax
snmp-server enable traps [notification-type] [notification-option]
To disable traps, use the no snmp-server enable traps [notification-type] [notification-option]
command.
ip access-list standard Names (or selects) a standard access list to filter based on IP address.
show running-config
snmp
Displays the current SNMP configuration and defaults.
text
Enter an alphanumeric text string, up to 55 characters long.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module