Reference Guide

sFlow | 577
Command
History
Example
Figure 30-1. show sflow Command Example
Usage
Information
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in Figure 30-1 always
displays a value of zero.
show sflow stack-unit
Display the sFlow information on a stack unit.
Syntax
show sflow stack-unit {unit number}
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-2. show sflow stack unit Command Example
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS##show sflow
sFlow services are disabled
Global default sampling rate: 32768
Global default counter polling interval: 20
Global extended information enabled: none
0 collectors configured
0 UDP packets exported
0 UDP packets dropped
0 sFlow samples collected
FTOS#
unit number
(OPTIONAL) Enter a unit number to view information on the stack unit in that slot.
Range: 0 to 5.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show sflow stack-unit 1
Stack-Unit 1
Samples rcvd from h/w :0
Total UDP packets exported :0
UDP packets dropped :0
FTOS#