Reference Guide

536 | Security
www.dell.com | support.dell.com
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-authenticated || none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
Defaults
none
Command Modes
CONFIGURATION
Command
History
privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
Syntax
privilege mode {level level command | reset command}
To delete access to a level and command, use the no privilege mode level level command command.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
name
Define a name for the list of authorization methods.
default
Define the default list of authorization methods.
local
Use the authorization parameters on the system to perform authorization.
tacacs+
Use the TACACS+ protocol to perform authorization.
none
Enter this keyword to apply no authorization.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
mode
Enter one of the following keywords as the mode for which you are controlling access:
•
configure for the CONFIGURATION mode
•
exec for the EXEC mode
•
interface for the INTERFACE modes
•
line for the LINE mode
•
route-map for the ROUTE-MAP
•
router for the ROUTER OSPF, ROUTER RIP, and ROUTER BGP modes.
level level Enter the keyword level followed by a number for the access level.
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes and commands.
reset Enter the keyword reset to return the security level to the default setting.
command
Enter the command’s keywords to assign the command to a certain access level. You can
enter one or all of the keywords