Reference Guide

Security | 535
Usage
Information
aaa authorization commands
Set parameters that restrict (or permit) a user’s access to EXEC and CONFIGURATION level
commands
Syntax
aaa authorization commands level {name | default} {local || tacacs+ || none}
To undo a configuration, use the no aaa authorization commands level {name | default} {local ||
tacacs+ || none} command.
Parameters
Defaults
none
Command Modes
CONFIGURATION
Command
History
aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
Syntax
aaa authorization config-commands
To disable authorization checking for CONFIGURATION level commands, use the no aaa
authorization config-commands
command.
Defaults
Enabled when you configure aaa authorization commands
Command Modes
CONFIGURATION
Command
History
Usage
Information
By default, the aaa authorization commands command configures the system to check both EXEC
level and CONFIGURATION level commands. To enable only EXEC-level command checking, use
the no aaa authorization config-commands command.
aaa authorization commands Sets the parameters that restrict (or permit) a user’s access to EXEC and
CONFIGURATION level commands
aaa authorization exec Sets the parameters that restrict (or permit) a user’s access to EXEC level
commands.
commands level
Enter the keyword commands followed by the command privilege
level for command level authorization.
name
Define a name for the list of authorization methods.
default
Define the default list of authorization methods.
local
Use the authorization parameters on the system to perform authorization.
tacacs+
Use the TACACS+ protocol to perform authorization.
none
Enter this keyword to apply no authorization.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module