Reference Guide

Remote Monitoring (RMON) | 511
Defaults
owner
Command Modes
CONFIGURATION
Command History
show rmon
Display the RMON running status including the memory usage.
Syntax
show rmon
Defaults
none
Command Modes
EXEC
Command History
Example
Figure 27-1. show rmon Command Example
show rmon alarms
Display the contents of the RMON alarm table.
Syntax
show rmon alarms [index] [brief]
rising-threshold value
event-number
Enter the keyword rising-threshold followed by the value (64 bit) the
rising-threshold alarm is either triggered or reset. Then enter the
event-number to trigger when the rising threshold exceeds its limit. This
value is the same as the alarmRisingEventIndex or alarmTable of the RMON
MIB. If there is no corresponding rising-threshold event, the value is zero.
falling-threshold value
event-number
Enter the keyword falling-threshold followed by the value (64 bit) the
falling-threshold alarm is either triggered or reset. Then enter the
event-number to trigger when the falling threshold exceeds its limit. This
value is the same as the alarmFallingEventIndex or the alarmTable of the
RMON MIB. If there is no corresponding falling-threshold event, the value
is zero.
owner string
(OPTIONAL) Enter the keyword owner followed the owner name to
specify an owner for the alarm. This is the alarmOwner object in the
alarmTable of the RMON MIB.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show rmon
RMON status
total memory used 218840 bytes.
ether statistics table: 8 entries, 4608 bytes
ether history table: 8 entries, 6000 bytes
alarm table: 390 entries, 102960 bytes
high-capacity alarm table: 5 entries, 1680 bytes
event table: 500 entries, 206000 bytes
log table: 2 entries, 552 bytes
FTOS#