Reference Guide

478 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command
History
Usage
Information
When rate-shape in QoS policy is applied both on queue level and aggregate mode, the queue-based
shaping occurs first followed by the aggregate rate shaping.
Related
Commands
service-policy input
Apply an input policy map to the selected interface.
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input policy-map-name
[layer2] command.
Parameters
Defaults
Layer 3
Command Modes
INTERFACE
Command
History
Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Related
Commands
service-policy output
Apply an output policy map to the selected interface.
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name command.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
rate shape Shapes the traffic output of the selected interface.
qos-policy-output Creates a QoS output policy.
policy-map-name
Enter the name for the policy map in character format (16 characters
maximum).
You can identify an existing policy map or name one that
does not yet
exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map.
Default: Layer 3
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Note: The service-policy commands are not allowed on a port channel.
The service-policy input policy-map-name command and the service-class dynamic dot1p
command are not allowed simultaneously on an interface.
policy-map-input Creates an input policy map.